S960QL High-Strength Steel Plate
Ultra-high-strength quenched and tempered steel plate, minimum yield 960 MPa, for crane booms and lightweight high-strength structures. EN 10204 3.1 certificates by heat number.
Description
S960QL is an ultra-high-strength quenched and tempered structural steel under EN 10025-6. At 960 MPa minimum yield it is among the strongest weldable structural grades in regular production, used where a lighter structure must still carry extreme loads. Welding and processing follow the mill recommendations for high-strength quenched and tempered plate.
Mechanical Properties
Minimum yield strength 960 MPa.
Equivalent Grades
GB Q960E (comparable) | EN 10025-6 S960QL
Standards
EN 10025-6 S960QL
Chemical Composition (max, %)
| C | ≤ 0.20% |
| Si | ≤ 0.80% |
| Mn | ≤ 1.70% |
| P | ≤ 0.020% |
| S | ≤ 0.010% |
| Cr | ≤ 1.50% |
| Mo | ≤ 0.70% |
| Ni | ≤ 2.00% |
| V | ≤ 0.12% |
| Nb | ≤ 0.06% |
| Ti | ≤ 0.05% |
| B | ≤ 0.005% |
| Cu | ≤ 0.50% |
Typical Applications
Crane booms and telescopic arms, ultra-high-strength lightweight structures, lifting and transport equipment, and applications where maximum strength per kilogram is required.
Supply from Nasteel
High-strength steel plates are supplied on inquiry — please send your grade, thickness, width, length and quantity. Mill test certificates to EN 10204 3.1 are issued by heat number.
Contact: Rocky Liu, Shenzhen NewAsia Special Steel Co., Ltd. — [email protected] — WhatsApp +86 13302996643.
