SAE1045 Seamless Steel Pipe
Medium-carbon seamless steel pipe for shafts, gears and high-strength machinery parts. In stock, EN 10204 3.1 certificates by heat number.
Description
SAE1045 is a medium-carbon steel that responds well to heat treatment, reaching higher strength and wear resistance than low-carbon grades while keeping good machinability. A workhorse grade for power-transmission and load-bearing tubular parts.
Equivalent Grades
GB 45# | JIS S45C | EN C45E (1.1191) | DIN C45
Standards
ASTM A106, ASTM A519 1045, GB/T 8162 / 8163
Chemical Composition
| C | 0.43–0.50% |
| Mn | 0.60–0.90% |
| P | ≤ 0.040% |
| S | ≤ 0.050% |
Typical Applications
Shafts, axles, gears, bolts and high-strength machinery parts, structural tubes, automotive and agricultural machinery.
Supply from Nasteel
We hold about 60,000 tons of seamless steel pipe in stock, covering SAE1020, SAE1045, SAE1518, 40Cr, 42CrMo, 16Mn and 27SiMn. Orders of 100 tons can be ready in as little as 3 days. Mill test certificates to EN 10204 3.1 are issued by heat number. Sizes, wall thickness and length are available on inquiry — please send your specification, quantity and destination port.
Contact: Rocky Liu, Shenzhen NewAsia Special Steel Co., Ltd. — [email protected] — WhatsApp +86 13302996643.
